compressing stress中文什么意思

例句与用法

更多例句：  下一页
1. The optimal processing parameters are as following : the compressing stress is looompa , powder size 100 - 120 mesh , the ratio of magnetic powder and adhesive reagent 2 . 5 : 100
   粘结磁体的最佳工艺条件为：成型压强1000mpa 、磁粉粒度在100 120目左右、粘接剂的含量为2 . 5g 100g磁粉。
2. 6 ) horizontal braces force of horizon that results from tension . therefore , it reduces pre - compress stress . horizontal braces is stronger , it ' s influence is more important
   （ 6 ）横向约束的存在减弱了张拉在框架梁中形成的轴向力，从而减小在框架梁中预压应力，横向约束越强，它的影响就越大。
3. As well , the compress stress existed in ( 002 ) crystal plane are found and can be explained by the matching between film material and substrate material as well as the different thermal expand coefficient between them
   同时， zno薄膜( 002 )方向上存在着内应力，内应力是由膜材料与基底材料之间的晶格失配和不同热扩散系数造成的，退火可可使内应力的到不同程度的释放。
4. The ground stress distribution within southern margin of junggar basin assumes that its compressing stress increases vertically with depth and compatible with the structural layers ， which can be divided into deep compressive belt ， medium shear zone and shallow tensile fracture belt
   盆地南缘区域地应力分布规律表现为纵向上压应力随深度增加而增大,并与构造层配伍,可分为深层挤压带、中层剪切带、浅层张裂带。
5. The test results show that the out - of - plane compressive property of 3d woven composite are rate sensitive . the elastic modulus is n ' t increased with the rising of strain - rate , however , the maximum compress stress and strain of 3d woven composite increase from 228mpa to 272mpa , from 15 % to 20 % as the strain rate increases from 2000 / s to 3000 / s
   实验结果表明，三维机织玻璃纤维复合材料在面外力学性能上是应变率相关的，随着应变率的增大，冲击压缩初始模量基本不变，但最大应力和最大应变都明显增加。